Crafts from corrugated cardboard flowers. We create wonderful crafts from corrugated cardboard with your child. A voluminous flower made of corrugated paper is ready

Making crafts from corrugated paper with your own hands is very fun and exciting. This beautiful and supple material has gained great popularity among needlewomen. In addition, corrugated paper is inexpensive and boasts a huge variety of colors.

We bring to your attention a few simple lessons on creating crafts from corrugated paper. They will help you explore this fascinating process in detail and suggest a lot of new ideas for creativity.

We will need: corrugated paper of different colors, wooden skewers or sticks, glue and scissors.

Step one. Cut the paper into equal strips. We fold each strip into several layers and cut it into thin strips (not completely!), As shown in the photo.

Step two. We wind each strip of the resulting fringe onto a wooden skewer, which we then take out. As a result, we will get curls along the entire length of the paper tape, which we wind around the skewer to make a hyacinth inflorescence. Before that, we dip the tip of the skewer in glue. To make the inflorescence more magnificent, it is better to use two strips with curls.

Step three. We cut thin strips from green corrugated paper. We drip glue on the lower part of the inflorescence and from this place wrap the skewer with a green strip to the end of the stem, where we fix it with glue.

Step four. We cut out two green rectangles of different sizes, and from them - leaves, give them a convex shape. Next, glue the leaves to the stem.

Step five. In the same way we make the rest of the flowers. Inflorescences can be made from two multi-colored stripes. The more colors we use, the more interesting the composition will turn out.

A luxurious bouquet of hyacinths, made by yourself, is ready!

Topiary "Heart" from corrugated paper

We will need:

pink corrugated paper
trimming pencil
pot for a tree
cardboard, foam, glue and scissors
tree trunk - any suitable size stick
elements for decoration

Step one. We cut the pink corrugated paper into identical squares and cut out a big heart from the foam. Next, we make out the heart with the help of a volumetric application using the facing technique. To do this, press the pink square to the blunt tip of the pencil and crush it, as shown in the photo. We got a tube-end.

Step two. We apply glue to the tip of each trimming tube and glue the element on the heart. We continue to attach the formed pieces of paper elements until we cover the entire surface of the heart in this way. We try to place the trimming tubes very close to each other.

Step three. We cut the finished heart with scissors so that it looks even and neat. Pour any filler into a pot for a tree. Next, we cut out a circle from cardboard along the diameter of the container for the topiary with a hole for the barrel, decorate it using the technique of trimming with green corrugated paper and place it in a pot. We also glue the trunk with a green paper strip, fix it in a pot, and glue the other end to the heart.

Step four. We decorate the tree with birds and satin ribbons. We decorate at our discretion and a flower pot. Such a wonderful souvenir can be made with your own hands and presented to relatives or friends on Valentine's Day.

Easter egg stand

We will need: corrugated paper, cardboard for the base, scissors, decorative elements and glue.

Operating procedure:

We make the base for the stand from cardboard.
We cut out a fairly wide strip of corrugated paper and glue it on a round cardboard base.
We fill the inside of the stand with pieces of organza, lace or soft wire. We complement our creation with bright elements. You can use paper flowers, beads, pebbles and other decorations. The handmade egg stand is ready.

Corrugated paper pineapple

We will need: green and yellow corrugated paper, a low bottle with a low neck, gold foil, scissors, glue.

Operating procedure:

From green paper we cut out leaves 2 cm wide and 8 cm long, and from yellow - pineapple scales 2-3 cm wide and 9 cm long. Then fold the scales in half and twist them in the fold.
We close the bottle with a cork and wrap the top of the neck with golden foil. Next, we glue leaflets from top to bottom on the neck of the bottle, and scales on the rest of it. We arrange them in a checkerboard pattern.
We make a bottom with leaves and color the pineapple with a felt-tip pen with brown strokes.

Corrugated Paper Butterflies

Such cute butterflies according to the simple scheme attached to us can be made in 15 minutes. For creativity, we need: corrugated paper, threads, scissors, glue and decorative elements.

Operating procedure:

We cut out two pairs of wings of different sizes from multi-colored corrugated paper, put them on top of each other, and then tie them in the center with a thread and spread the wings. If the butterfly is to be used as a pendant, the thread does not need to be cut.
Next, we make the body of a butterfly. To do this, cut out a narrow strip, bend it in half, make an incision, as shown in the diagram, and wrap it around the central part of the butterfly. We twist the antennae from the incised ends.
We glue sparkles or sequins on the wings - and the fluttering beauty butterfly is ready.

More craft ideas

The most popular corrugated paper crafts are flowers. For their manufacture, there are many simple and detailed schemes. Here are just a few of them.

From corrugated cardboard do it yourself, provided step-by-step instruction along with a photo. The craft will decorate your collection, kindergarten or child's room for the summer holidays.

We will need:

- ordinary cardboard;
- corrugated cardboard;
- gouache;
- brushes;
- PVA glue;
- a simple pencil very soft 3B.

1. We draw flowers on ordinary cardboard.

2. Cut out.

3. Draw circles in the middle of the flowers.

4. We take corrugated cardboard and circle our two flowers.

5. Cut out from corrugated cardboard.

6. We spread the corrugated cardboard flower with PVA glue and glue the flower from ordinary cardboard.

7. We paint with gouache that part of the flower where the petals will be located in yellow, let it dry and apply a second layer of gouache.

8. We take the second flower and paint with gouache that part of the flower where the petals will be located in red, let it dry and then apply a second layer of gouache.

9. On the first flower, paint the core (circle) red, let it dry, then apply a second layer of gouache. On the second flower, paint the core (circle) yellow, let it dry and then apply a second layer of gouache.

10. Circle the circles with a simple pencil, draw the petals.

11. We draw eyes and a mouth with a pencil on a yellow flower.

12. We draw eyes and a mouth with a pencil on a red flower.

13. We draw stamens with a pencil on a yellow flower.

14. We draw stamens with a pencil on a red flower.

15. Turn the yellow flower over and paint the entire back side of the flower yellow, let it dry, then apply a second layer of gouache. We turn the red flower over and paint the entire back side of the flower red, let it dry and apply the second layer of gouache again.

16. Cut out corrugated. cardboard two strips 2x4, 5cm.

17. We paint the strips with red gouache on both sides, let it dry and apply a second layer of gouache.

18. We make shallow cuts with a clerical knife in this way, on this side 5mm, on the other 1cm.

19. Bend the strips like this.

20. Glue the strips on the back of the flowers, bend 5mm, glue to the flower, bend 1cm - base. They will act as a stand.

21. Done.

Home decor is a constant and non-stop job. In the process, new techniques and types of work are mastered. In this article we will talk about how to make flowers from corrugated paper. This paper can be found in flower shops. But in a larger assortment, it is in specialized establishments that sell everything for needlework. You will also need wire or thin sticks (bamboo skewers are also suitable), glue and scissors.

General principles and rules

Despite the fact that crepe paper flowers are made differently, the principles of work are the same. Here is a brief general rules, which will help you make paper flowers with your own hands, very similar to real ones.

Here, in fact, are all the rules. And one more thing: the stem is prepared first. For it, wire or sticks of different thicknesses are used, which are wrapped in a long thin strip of green corrugated paper. The tape can be coated with glue, and then wound onto the base. You can twist it dry, and fix the edge with a drop of glue. One more thing: if you are going to assemble a composition from flowers, leave the lower 1/3 of the stem unfinished - it will be easier to make a bouquet.

poppies

Making crepe paper poppies is very easy. Important to find desired shade scarlet color. You will also need a small piece of black - for the core. But, if it is not there, you can use any dark one, then painting it black.

We do poppy from corrugated paper like this:

From paper napkins of any color, we fold a small square. We wrap it with black corrugated paper. If there is no black, take any dark one, then paint it.
We cut out two or three petals of different sizes from scarlet paper: small, medium and large.
We collect the petals all together (do not put in a neat pile) and crush into a ball.
We disassemble the ball into petals.
We take the core, wrap the first small petal around it from left to right.
The second small petal partially overlaps the first one, followed by the middle one, also overlapping.
The second middle and two large petals form the second row. They are located so that their central part overlaps the junction of the previous row.
Having gathered everything together, we insert the wire into the base, wrap the base with a thread, glue it. Wrapped in green paper.

Poppy is one of the easiest flowers to self-manufacturing from corrugated paper. He looks very good, though. You can use them in a campaign with other flowers, or make a bouquet of poppies only.

Even such a simple flower can be made in different ways. First of all, you can change the middle. In the master class described above, the core of the flower is very simple. It can be made more natural. Using the same technology, we make the middle, but from white paper. And from black (can be painted), we cut out a strip about 1 cm wide and 4-5 cm long. On the one hand, we cut it into thin stripes (a couple of millimeters wide). We twist the resulting "noodles", getting thin stamens. We wrap the stamens around the core, and then we follow the same algorithm.

How to make paper and candy crocuses

An unusual gift can be made using candy as the core of flowers. It turns out an original sweet gift. Such a core can be made in flowers with a large bud hollow inside - a tulip or a crocus, for example. Moreover, crocuses made of corrugated paper are very simple to make. Everything will take 5-10 minutes. Not more.

Bouquet of corrugated paper with sweets - a good surprise

From paper cut out a square with a side of 15 cm.
We divide it into three parts, making a cut to a depth of 7.5 cm. Three petals are obtained.
Each petal, having measured 5 cm from the top, scrolls around its axis and bends the upper part down.
Give them a concave shape with your fingers.
We take the formed petals, wrap them around the stem so that each petal takes its place - about 1/3 of the entire diameter. To do this, the bottom edge will have to be well crushed.
We make leaves from green paper. Cut out a rectangle with sides 5 * 8 cm.
We divide it into three parts, making cuts to a depth of 8 cm.
Stepping back from the edge of 3 cm, we twist a strip of paper around its axis, bend the upper part down, straighten it and give it a rounded shape.
Wrap the leaves around the bud. They should fall on the junction of the petals.
We take a narrow strip of green paper, twisting it around the wire, we make out the stem.

That's all, the crepe paper and candy crocus is ready. Having made 7-9 pieces of such flowers, they can be put in the basket. For more variety, you can make some small flowers.

Chrysanthemum

Using the technology described above, you can make chrysanthemums. The difference is that there will be many petals and they will be narrow. And the principle is the same: we twist the upper part of the petal, lower it down. Only in the case of chrysanthemums, it is necessary to give the entire petal a curved shape.

For these paper chrysanthemums, sweets are also used as a core. These crepe paper flowers are best made from a material that is not too bright. Tones are more gentle, soft. Muted greens are also chosen for foliage. For more believability, take paper of two similar shades and make petals of two shades.

So, do-it-yourself chrysanthemum from corrugated paper:

This version of chrysanthemum looks good. But for greater credibility, you can make petals of different sizes. We need at least three gradations: small, medium and large. They will differ more in length than in width. Such a flower will look more magnificent, look richer in a bouquet. Try.

Asters - simple and original

If you need to make simple but spectacular crepe paper flowers, try making asters. They are made from corrugations of bright and pastel shades. They look best in a bouquet, and the colors can be different.

Corrugated paper asters can also be made from petals of different sizes - shorter ones closer to the center of the flower (there should be fewer of them), and longer ones on the periphery (there are more of them). You can bend them in one direction, but you can - in the opposite direction. As you like.

Corrugated paper roses: a step-by-step manufacturing algorithm (2 ways)

Corrugated paper flowers are good because they can be made in different ways. The material is very plastic, easily changes shape because there are several ways. Someone wants to achieve greater "naturalness", while someone is important speed.

1 way (natural look)

For corrugated paper roses, it is better to choose paper of two or three very close shades. So the look of the flower will be more natural. For example, white and crepe paper was used for the flower in the photo. The number of petals of different shades is arbitrary, as is their placement in the bud.

The production order is:

As a result, we get a beautiful rose from corrugated paper. In this performance, it looks like a real flower. There is also a simpler fast way(pictured below).

2 way (simple and fast)

We cut out a strip of paper 7-8 cm wide. You can make it uneven - narrower on one side, wider on the other. We fold it starting from the narrow edge with an "accordion". The width of the "accordion" is 3.5 -4.5 cm. Cut out the petals from the resulting stack by 2/3 of the height.

We wind the petals onto the wire (you can not wrap it with green tape yet), starting from the narrow edge. As we wind, we give them a shape with our fingers - stretch on one side, crush at the stem. Having installed all the petals, we fix them with a thread (just by winding a certain number of turns). We correct the petals, forming a bud.

From green paper, folding it like an accordion, cut out long and narrow petals. Keep in mind that their ends will need to be twisted, so they should not be so narrow (noticeably 1 cm). We wrap the cut petals from below, under the petals, twist the leaves with our fingers, and then we make out the stem.

Corrugated paper peonies (with patterns)

For peonies, you need yellow corrugated paper - for the core, green - for foliage, pink, cream, raspberry - for the flower itself. For the stem, a wire or a thin stick is suitable. You will also need PVA glue.

Corrugated paper peony is a rather difficult flower to make. He has a lot different shapes petals. You can't do without a pattern here. But there are many varieties of peonies, so there are several patterns. We present two options. The first one can be printed, cut out and used as a template - it is given in a full-size image. The second option can be drawn with your own hands in the cells.

Step by step manufacturing process with photo:

Cut out a strip of yellow paper 4-5 cm wide and 10-12 cm long. Fold several times, cut into thin “noodles”, leaving about 1 cm of uncut edge.
We roll the resulting tape into a tight roll, using the whole edge for this. We grease it with glue, and twist it. It turns out a shaggy yellow core, around which the petals will be attached. We fix this center on a stick / wire, which will be the stem.
Cut out petals from paper. The minimum quantity is 20 pieces (of all types), but the more, the more fluffy the flower will turn out. On the second pattern, the number of petals is indicated on each, on the first, explanations are needed. There are also numbers. This is the required number of petals.
Stretch each petal in the middle, without touching the edges, giving them a convex shape. Don't try to make them the same. This is not required. In the process, it will still be possible to stretch or tighten a little.
We begin to fold the petals from the smallest. We place them around the already existing middle. We place the first small petals only slightly overlapping their edges. We coat the base with glue.
Next, take the middle petals. We lay them with a slight approach to one on top of the other.
Then we lay the large and last - very large leaves. We coat each layer with a small amount of glue at the base.
You will also need leaves. We cut them out of green paper. On the one hand, we compress them, forming a petiole, on the other, we straighten them in the middle, giving a curved shape (similar to a boat).
We fasten the leaves under the bud, bend them down.
You can also make leaves, like a peony, but this will also require a thin wire and a few cut out curly leaves. Veins on corrugated paper cannot be made, but they can be marked with paint.
We glue each leaf to the wire, wrap the petiole with a thin strip, then attach it to the stem.
The assembly process is a creative activity
We take a long narrow strip of green corrugated paper (about 1 cm wide, 20-30 cm long - depends on the length of the stem). We wrap the base of the flower, then smoothly move to the stem. At the end, we fix the edge of the paper with a drop of glue.

Peony from corrugated paper is ready. Usually they make up a bouquet. When you do the next ones, don't try to make them exactly the same. All flowers in nature are unique. Yours should be different too.

You can play with the size and number of petals, mixing petals of different shades, similar in color. You can try to make the petals at the base darker with paint. In general, there are a lot of options.

Corrugated paper flowers: photo ideas, patterns

Using the techniques described above, you can make any flower. The main snag is in the shape, number and size of the petals. The most important thing is the form. It is characteristic of each petal. Dimensions are arbitrary. Not only do flowers come in different sizes in nature, it has recently become fashionable to decorate the interior with giant growth flowers. Decoration is original, but specific. It is necessary to increase the basic patterns many times over, it is difficult to work with large scales. It's better to practice on flowers first normal sizes and then proceed to the big ones.

A little about patterns. They can not only be found. If it happens in the summer, take the desired flower, disassemble it into petals. From the whole pile, select the most characteristic, attach to a sheet of paper, circle. Then the shape must be corrected, taking into account the fact that these are still paper flowers. The final pattern will take shape after a few trial and error. We will post several patterns and master classes in the photo in this section.

cornflowers

How simpler flower, topics more ways do it. Corrugated paper cornflower can be made using different techniques. Examples are in the photo.

If you want to make it very similar to the real one (A - a pattern for a blossoming flower, B - for a bud)

Iris

Making iris out of paper requires some imagination. A very unusual flower. The photo shows several techniques that allow you to achieve a different effect. Some flowers just resemble the original, some are very similar to it.

Anything-Miscellaneous

Lilies… Beautiful, but several techniques are used

Pansies - a pattern for making corrugated paper

For the "advanced". A very beautiful flower

Cute daisies - an option for beginners

Corrugated paper flowers are usually used to decorate gifts. But if you decorate a photo frame, a wall clock with them, make a panel or an elegant one, then they will decorate the interior and bring lightness to it. Before you learn how to create do-it-yourself corrugated paper flowers, you need to understand what material is suitable for this and what else is needed to make the craft look like a real plant.

Getting to know the material

Corrugated paper is also known as crepe or crepe paper. The only difference is that the corrugation (gaufrer) is French, and the crepe (crepe) is English name. There is also an analogue in Russian - a reaper, pressed paper. There are several options for corrugated paper on sale, but the main classification is divided by sheet density:

Paper for creativity and gift wrapping: density 30–50 g, small folds, the height of which is not regulated. It is not very suitable for floristry, because it does not stretch well, it breaks and gets wet from the glue.

Floral paper is used for flower wrapping and sweet designs. Its density is in the range of 120–180 gr. Deep folds provide just the right amount of stretch to create true-to-life colours.

Corrugated cardboard has a high density and is only suitable for making gift boxes.

Please note that "fine crepe" is listed on the packaging of the craft paper. Floral paper marking contains the inscription "crepe extra", and on the sheets themselves there are transverse textured stripes.

Folds on floral paper are called flutes, which are divided into three types:

E-flute up to 1.6 mm high - for making small flowers;
V-flute up to 3.2 mm high - for growth paper flowers;
A-flute up to 4.8 mm high - for packaging.

The color palette includes not only plain paper, but also metallized double-sided, with gradient and rainbow colors.

Also, for creativity, we need auxiliary materials:

Type tape, which is used as colored tape to decorate the base of the flower and stem;
Scissors and stationery knife;
PVA glue (thick), thermal gun;
Threads for attaching petals, sheets;
Floral and regular wire;
Wooden sticks for stems;
Styrofoam balls or candy for the center of the flower.

And also: ribbons, frames, baskets, vases and even cups and saucers - the decor is limited only by the master's imagination.

Basic techniques and secrets of creating flowers from corrugated paper

Master florists have come up with hundreds of ways to make do-it-yourself corrugated paper flowers. However, there are basic techniques, combining and transforming which you can achieve an almost perfect resemblance to the original.

Stem

Please note that the stem for any type of flower is created according to a single principle:

The base is a floristic wire, a wooden stick or a paper tube.
It is necessary to attach the stem to the flower head at the initial stage (it is threaded through the layers of paper that forms the petals) or the flower is collected directly on the stem.
The stem can be decorated with either a thin strip of corrugated paper on glue or green type tape.
For a greater resemblance to a real branch, it is necessary to cut the leaves and attach them to the stem, masking the junction with tape.

How to easily twist thin paper tube explained in this video:

stamens

A ready-made strip of corrugated paper of two or more colors is used, or you can cut it yourself from a sheet. On layers grind off.

Gathering should be done immediately - then it will not be possible to pull the thread without damaging the paper.

Then the workpiece is spirally wound on a rod or attached to the surface, and the collected waves create volume.

Also twisting are made for this ball.

But in this case A strip of corrugated paper is folded in half and then rolled into a roll. To prevent the flower from falling apart during the assembly process, it must be glued as the roll increases. In conclusion, fingers should gently straighten the curls, forming an open rose. The base is a foam ball on which roses are glued.

Corrugated paper flowers made in a similar technique are shown in a master class on creating a rose with an original twisted edge:

This technique is popular for making chrysanthemums, daisies, daisies, carnations, and other flowers with many small petals. The base is a long strip with cut fringe or carved rounded petals. For example, this charming rose.

Flowers from individual petals

These delicate flowers are made without a base, by joining individual petals cut according to a pattern.

For cherry blossoms you will need:

three long rectangular strips with rounded edges for the petals,
one long rectangular strip with pointed edges for leaves,
for the core, a short strip with transverse cuts.

The blanks of petals and leaves should be folded in half, mark the center and straighten the edges, forming a bend. Assembly is carried out with the help of glue by simply connecting the blanks one on top of the other, a twisted core is attached to the center of the resulting flower.

Blanks for pansies are cut out of multi-colored paper; if desired, the middle can be tinted and veins can be drawn. The assembly of the flower is carried out by connecting the petals to each other also with glue or thread. As a stem, floristic wire would be appropriate here.

This chamomile is assembled using a similar technology, but for the possibility of making a bouquet, a stick is used as the basis.

To make this tulip as similar as possible to a real one, it was necessary to create a core using a special technology.

Flowers on a fixed basis

There are many options for flowers that are made using this technique: chamomile, but the most common is the English rose.

The peculiarity is that the petals are wound onto a base - a foam or paper ball, which can be replaced with a small round candy.

MASTER CLASS ON THE TOPIC

Just according to this principle, this

1. Cut strips of corrugated paper approximately 6 cm wide and 10 cm long. The colors can be combined as you like: a delicate milky core and rich yellow, orange or red outer petals.

2. Fold the blanks with an accordion along the width of the petal, round the edges.

3. Spread the corrugations a little with your fingers, forming a wavy edge, then wrap the petals with toothpicks, giving a natural shape.

4. The blank of petals should be stretched, giving a semicircular shape - this will facilitate the formation of a flower.

5. We wrap the base of the flower with a rectangular strip without cuts, pulling the corrugations so that the paper tightly wraps the ball or candy. We fix with a drop of glue, and pull the bottom with a thread.

6. We overlap all subsequent petals in a circle, tightening with a thread. At the end of the work, we decorate the assembly place with a sepal of green or any other color in accordance with the intended composition.

Advice. If you want to make a bouquet on stems, then the sticks should be glued with hot glue to the base of the flower - a ball or candy before the flower begins to form.

Here is a slightly simplified, but no less spectacular version of this flower.

Master Svetlana Bormotova suggested a simple technique that turns an ordinary rose into an exquisite flower:

This decorative artichoke is also created on a fixed basis. Incredibly beautiful decorative element!

It’s not immediately possible to guess that a candy is hidden in a graceful narcissus - you will definitely be sorry to violate such grace:

Original compositions and examples of decor creation

Traditional decoration - bouquets in a vase. You can collect a bouquet of daisies, roses, tulips, and for experienced florists it will not be difficult to create a gladiolus branch:

If you love indoor flowers, but don't have time to grow them, then a crepe paper orchid flower is just what you need. This is a difficult job that requires certain skills, but the result is worth it.

You can decorate a room not only with bouquets of paper flowers. For example, for indoor wedding ceremonies, you can create a photo zone of paper flowers. They are attached to a perforated wall with a wire bent in the form of a hook.

Using the described techniques, you can create a topiary. A foam ball is taken as the basis, which is pasted over with corrugated paper petals.

This "classy magazine" harmoniously combines the warmth of the created bouquet and the sweet filling of the box. Such a gift will definitely be remembered for a long time!

Your guests will immediately pay attention to decorating the interior, but they will not immediately understand how this cup does not fall ...

With a little patience and diligence, you will create elegant decorations for your room, make a celebration unforgettable, or simply and loved ones with a custom-decorated simple gift.

Master classes from the unique master Lia Griffith

Lia Griffith makes incredibly beautiful crepe paper flowers! Her step-by-step master classes are accessible and understandable, despite being presented in English.

Inspiration and beautiful flowers!

Master Class

Corrugated paper peonies are ready! I recommend watching this video!

Realistic lilies

You will need: lilac, green and yellow corrugated paper, scissors, paints, brush, wire, glue gun, ruler, semolina, pencil.

Master Class

Prepare a 7 cm strip of lilac paper.
Cut it into 6 equal pieces.
Cut out 6 petals from the blanks.
Stretch the edges of the petals, then twist with a pencil, giving a realistic shape.
Mix brown and purple paint, then paint the spots on the petals with a nearly dry brush.
Wrap the wire with a strip of green paper and fix with glue.
Prepare a square of yellow paper, then make 5 cuts and twist the stamens.
Put a drop of glue on the tip of each filament, dip it in semolina and dye it brown.
Prepare strips of green paper, cut the leaves and stretch them slightly.
Glue the stamens to the pistil.
Glue the petals around.
Glue green paper at the base of the bud, forming a receptacle.
Glue the leaves to the flower.
Make the right amount of lilies in the same way.

Corrugated paper lilies are ready! I recommend watching this video!

huge rose

You will need: thick cardboard, corrugated paper, a simple pencil, scissors, thick wire, green floral tape, adhesive tape, glue.

Master Class

Draw or print templates and transfer them to thick cardboard.
Cut out 15 heart-shaped petals and 5 droplets from crepe paper (for one flower).
Shape the petals: hearts - stretch a little to the sides, and twist the droplets using a pencil.
Take 2 pieces of thick wire and wrap with floral tape.
Glue a piece of crepe paper to the stem as a core.
Form a bud: glue drops, then hearts, fix with adhesive tape.
Cut out a sepal from green crepe paper as shown in the picture.
Secure the sepal at the base of the flower using duct tape.
Cut out the leaves and glue them to the stem.

bright poppies

You will need: red, green and black corrugated paper, scissors, black thread, paints, brush, green tape, paper, wire, glue gun.

Master Class

Bulk flower

You will need: 7 sheets of corrugated paper measuring 50x75cm, 7 clips, scissors, ruler, wire.

Master Class

Fold each sheet of paper like an accordion, fold width 7 cm.
Fix the clip in the center of each sheet.
Lay out the sheets in the desired sequence of colors.
Make each next strip shorter than the previous one by 5 cm.
Give the ends of the strips a rounded or sharp petal shape by moving the clips to the center.
Make cuts in the folds, leaving the paper under the clip uncut.
Arrange the strips so that the longest is on the bottom and the shortest is on top. It is worth noting that the center of all stripes should be on the same line.
Fold the accordion and secure with wire.
Fan out the folds.
Carefully fold back the layers of paper one petal at a time, trim the edges with scissors if necessary.

A voluminous flower made of corrugated paper is ready!

Corrugated paper cornflowers

You will need: blue and green corrugated paper, scissors, black thread, wire, semolina, glue gun.

Master Class

Wind the thread around 3 fingers in 50 turns, then tie the skein in the center to make a bow.
Cut the bow on both sides to get the filaments.
Prepare a piece of wire measuring 25 cm.
Wrap the wire with green paper and glue the filaments.
Apply glue to the threads, then dip them in semolina.
Prepare a strip of blue paper 25 cm long, 3 cm wide.
Fold the strip 4 times and make cuts.
Unfold the strip, then twist around the threads, forming inner petals, fix with glue.
Prepare a strip of blue paper 50 cm long, 7 cm wide.
Fold the strip 6 times and make cuts in the shape of teeth.
Unfold the strip, then fold it like an accordion.
Twist the strip around the inner petals and secure with string.
Take a strip of green paper and glue it to form a receptacle.
Cut out oblong leaves from green paper, then glue them to the stem.
Make the desired number of cornflowers in the same way.

Corrugated paper cornflowers are ready! I recommend watching this video!

You will need: white and green corrugated paper, cotton wool, scissors, corn grits, glue gun, wire, foam plastic.

Master Class

Corrugated paper snowdrops are ready! I recommend watching this video!

original bell

You will need: white-blue and green corrugated paper, thick and thin wire, glue gun, scissors, pencil, ruler, flower pot and pebbles.

Master Class

Prepare a rectangle of white and blue paper measuring 18x23cm.
Fold it 5 times with an accordion and cut the top edge in a semicircle.
Unfold and slightly stretch each semi-circular tip.
Fold the paper into a cylinder and secure with glue.
Gather the smooth edge of the cylinder into a bundle, insert a piece of thin wire 10 cm long, fix it well with glue and wait until it dries completely.
Form a bell shape with your hand from the inside of the flower.
Cut out a strip of green paper, wrap the stem around and secure with glue.
Make 4 more bells with small stems in the same way.
Prepare a piece of thick wire 70 cm long and make a curved shape.
Wrap the stem with a strip of green paper, fixing it with glue.
Glue 5 bells to the stem, mask the attachment points with green paper.
Cut out 2 large oblong pieces of green paper and glue them to the bottom of the stem.
Insert the flower into the pot of stones.

Corrugated paper bell is ready! I recommend watching this video!

Tender rose

You will need: pink and green corrugated paper, green adhesive tape, stick or wire for the stem, scissors.

Master Class

Tulips from corrugated paper and sweets

You will need: corrugated paper of your favorite colors for buds, green corrugated paper for leaves, Raffaello sweets, double-sided thin tape, green teip tape, satin ribbon, packing material for the bouquet, scissors, wire, pliers, wooden stick, if desired, to create dew - transparent beads, glue gun, tweezers.

Master Class

Prepare the wire by making the desired number of stems of the same length.
Cut long strips of corrugated paper, cut the long strip of corrugated into 2 pieces, then cut into 4 pieces. You should get 8 strips, 6 of them will be needed for the tulip bud.
Turn each strip around the center, bend in such a way that the front sides of the strip are directed in one direction.
Make 6 blanks in the same way.
Attach double-sided tape to the end of the wire.