Things made of natural fur are not cheap, so they are bought not for one season, but for several years. During prolonged wear, the appearance of the product suffers: the fur is rubbed and fades. How to return your favorite fur coat to its former splendor? Of course, you can take it to a dry-cleaner, which implies financial costs, or you can dye the fur at home, thereby breathing new life into the fur thing.
During prolonged wear, the appearance of the fur coat suffers: the fur is rubbed and fades. One of the possible solutions to the problem is to dye the fur coat in a different color.
Preparing for painting
To dye the fur, you must first prepare it. During wear, contaminants accumulate on the surface of the product: particles of dust and grease. It is impossible to wash fur things in the usual way, and before painting, you need to thoroughly clean the surface to be treated so that the paint lies evenly and penetrates well into the villi. What to do? Should gently treat the fur with an alkaline solution which will dissolve grease and remove dust particles.
It is not difficult to prepare the mixture: 3 tsp are added to 1 liter of water. salt, 2 tsp. soda, 1 tbsp. l. detergent for dishes and 5 g of ammonia. But another option: water, vinegar and alcohol are taken in the same proportions. All components of the solution must be mixed properly, the dry components must be completely dissolved.
A variety of types of fur can be cleaned with such a liquid, for example, mink, silver fox, arctic fox, fox or rabbit. It is possible that after such a simple cleaning, the appearance of the product will improve and the need for staining will simply disappear.
Perhaps after cleaning the appearance of the fur coat will improve and you will change your mind about dyeing it.
Before applying the resulting solution to the fur, you need to process its wrong side - the mezra. The fact is that the skins after getting wet can crack or deform. Therefore, after the restoration of color, an unpleasant surprise may await you - the product will decrease in size or simply lose its shape. To prevent this from happening, it is best to treat the mezdra with glycerin or any nourishing and greasy cream, for which you need to carefully rip the lining.
After processing the mezra, the fur is carefully laid out on a flat surface and an alkaline solution is applied. It is best to distribute it over the surface of the product with a brush. With this treatment, the liquid will be distributed along the entire length of the villi. Then the product must be thoroughly washed off the fur and proceed directly to dyeing.
Fur dyeing
Hair dye
Fur villi are very similar in structure to hair, so hair dye is often used to color them. When buying paint, you should not save money - it is better to choose a resistant product, for example, for effectively painting over gray hair. The paint should be gentle with respect to the hair, in our case, to the villi of the fur. You should approach the choice of paint with the same care as when dyeing hair.
Fur villi are very similar in structure to hair, so hair dye is often used to color them. The choice of paint should be approached with the same care as when dyeing hair.
So, the tool is chosen, it remains to choose the right shade. In no case should it be lighter than the color of the fur. In order to dye the fur with high quality and the color lasts longer, it is better to choose a shade a tone darker than the existing one. On black or brown products, errors in choosing a color are not so noticeable, but white fur can turn an unpleasant yellow color.
The shade of the selected paint color should in no case be lighter than the color of the fur.
Owners of white fur coats and hats should know that you can say goodbye to ugly yellowness if you first discolor the villi with hydrogen peroxide, and then dye the fur in the desired color with ordinary hair dye.
How many packs of paint you need will depend on the density of the fur. For example, the coat of a fox or mink is denser and thicker than that of a rabbit. To dye mink fur at home, one pack of paint may not be enough, it is better to immediately purchase two, or even three if you have to dye a long fur coat.
Depending on the instructions in the instructions, the paint is applied to a dry or wet pile. This is best done with a brush or a special paint brush.
To make sure that the fur will respond well to the dye solution, and the color is chosen correctly, it is better to test it on an inconspicuous area of \u200b\u200bthe product before dyeing. It is especially important to carry out the procedure before dyeing rabbit fur, since it is one of the most vulnerable. If the resulting shade meets expectations, the villi do not fall out and do not break, you can safely proceed to coloring the entire product.
To dye natural fur at home with hair dye, you need to follow the instructions on the package. Depending on the instructions, the paint is applied to a dry or wet pile. It is best to do this with a brush or a special brush for paint, and then distribute it over the entire surface of the fur with massaging movements. The exposure time should also match the manufacturer's recommendations. The video below shows how to properly apply paint.
Special balms often come with high-quality paints. You can also use them for fur, after washing off the paint. Such care will give the fur of a fur coat, collar or hat shine and silkiness. You can additionally fix the pigment by spraying a solution of water with vinegar (250 ml of water per 1 tsp of 9% vinegar) on the painted product.
It is strictly forbidden to dry a fur product on a radiator, with a fan or a hair dryer. In addition, there is a little secret that will help protect the product from deformation. Before you leave natural fur to dry, you need to stretch it and carefully fix it on some hard surface with pins.
Other means
To dye fox fur at home, you can use paint from an aerosol can. The fact is that the villi of such fur are long and, first of all, their tips burn out and discolor. To restore the original appearance of the product, it is not necessary to paint it completely. You can simply spray the surface with suede paint, which is sold in aerosol cans.
You can dye the fur in this way quickly, without any extra effort and risk to the quality of the fur. But the result will not last as long as after hair dye. One season, the thing will be like new, but before the next season, you will have to dye the fur again.
It is better to hang the product and spray the paint from a distance of at least 40-50 cm. In order for the paint to be evenly distributed, you need to work out each section of the product, and then comb the fur. You don't need to wash off the paint.
To dye faux fur, you can use both hair dye and suede dye in an aerosol can. At the same time, the risk that the product is deformed is minimal, so it can be dried using a hair dryer and naturally.
Dyeing fur is easy if you choose high-quality paint and follow simple rules. Refreshing a fur coat at home will save money on dry cleaning and at the same time return it to the appearance of a new thing.
Found an error? Select the text with the mouse and click: 
Do you know that:
The easiest way to remove scale and soot from the sole of the iron is with table salt. Pour a thick layer of salt on the paper, heat the iron to the maximum and several times, pressing lightly, run the iron over the salt bedding.
Stretch ceilings made of PVC film can withstand from 70 to 120 liters of water per 1 m 2 of its area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you can not be afraid of leaks from neighbors from above.
The habit of using the washing machine “economically” can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothes to remain on internal surfaces and actively multiply.
Fresh lemon is good for more than just tea: clean stains from the surface of an acrylic bath by rubbing with a half of cut citrus, or quickly clean the microwave by placing a container of water and lemon slices in it for 8-10 minutes at maximum power. The softened dirt will simply be wiped off with a sponge.
In the dishwasher, not only plates and cups are washed well. It can be loaded with plastic toys, glass shades of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.
Before removing various stains from clothes, you need to find out how safe the chosen solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of \u200b\u200bthe thing from the inside out for 5-10 minutes. If the material retains its structure and color, you can move on to stains.
The threads of gold and silver, with which clothes were embroidered in the old days, are called gimp. To obtain them, the metal wire was pulled for a long time with tongs to the state of the required fineness. This is where the expression “pull (raise) the gimp” came from - “engage in long monotonous work” or “delay the execution of the case”.
To combat moths, there are special traps. In the sticky layer with which they are covered, pheromones of females are added to attract males. Sticking to the trap, they drop out of the breeding process, which leads to a decrease in the moth population.
If the first signs of gestation in the form of untidy pellets appear on your favorite things, you can get rid of them with the help of a special machine - a shaver. It quickly and effectively shaves off clumps of fabric fibers and returns things to a decent look.
Fur products lose their original luster and color saturation after two or three years. You can restore them with staining. You can dye artificial and natural fur at home with hair dye or special aerosols. Before the procedure, it is necessary to clean the hairs from fat and dirt. The color should be 1-2 shades darker than the original. The product is tested on an inconspicuous area first.
Dyeing natural fur
Products made of natural fur - rabbit, arctic fox, beaver, fox, silver fox, mink - every year lose their beauty and attractiveness. Some places, especially pockets and armpits, get rubbed. The product quickly loses its appearance, if a woman wears a bag with long handles, I will throw it over my shoulder.
Fur eventually fades in the sun and becomes lighter and dimmer, acquires a gray tint. In sheared products, the ends of the hairs lose their appearance after a couple of years and look scorched. Painting outerwear in specialized services is a rather expensive pleasure. procedure m Can also be done at home if you are careful and follow all the rules of painting.
How to starch a shirt at home - step by step instructions
Preparation of natural products for dyeing
First, natural fur is prepared for dyeing. It needs to be cleaned from dirt and dust. If you skip this stage, the paint on especially dirty and greasy places will be absorbed worse, and the fur will eventually be stained and streaked.
To clean products from dirt and grease, a solution is prepared:
- water - 1 liter;
- dishwashing detergent or shampoo - 1 teaspoon;
- ammonia (ammonia) - 5 g;
- salt - 15 g;
- soda - 10 g.
You can prepare a solution from improvised means:
- alcohol - 50 ml;
- vinegar 9% - 50 ml;
- water - 50 ml.
All ingredients are mixed and applied with a soft brush to the fur surface. It is necessary to control that the skin under the hairs does not get wet. Then, the foam is also gently washed off with a brush dipped in clean water. If possible, the skin on the back of the fur can be smeared with a greasy hand cream to prevent drying out.
Painting methods
Natural fur is similar in structure to human hair, so at home, professional hair dye or the one sold in supermarkets and household chemical stores is used to color it. High-quality and resistant paint will give a good effect that will remain for a long time.
When preparing a mixture for painting, it is necessary to evaluate the amount of work and the thickness of the hair. The paint needs to be diluted with a margin. For example, rabbit or mink fur is short, and silver fox, arctic fox, raccoon fur is long and dense, so twice as much paint will be required for the same area. Before staining, you need to do a test on a small inconspicuous area. This will help ensure that the right color is selected and the desired shade is obtained.
No need to try to radically change the color of a sheepskin coat or fur coat. It is better to choose a range of 2-3 tones towards a darker color. It will not work to dye a white fur coat black the first time, and by carrying out the dyeing process several times, you can damage the structure of the product with the chemical composition and spoil it.
The tool is applied with a brush for staining very carefully. It is necessary to paint over the fur to the roots, but at the same time try not to touch the skin. Withstand the paint from 20 to 40 minutes, focusing on the instructions in the instructions. First, the product is treated with a brush dipped in water, the main amount of the coloring composition is removed. The residue is then washed off with running water. Wash only the fur side, trying not to pour water on the skin. It is impossible to dry the product with a fan and a hair dryer. Do this in a straightened form, wiping the inner leather side dry from moisture.
Faux fur dyeing
When dyeing fake fur, you need to take into account the color of the main fabric on which it is planted. The dye is tried on a small area, staining not only the hairs, but also the base fabric. Their shades after painting may differ, the fabric or hair may not be dyed at all. Sometimes faux fur sticks together due to a reaction with the dye. That is why a test staining of a small area is carried out with the passage of all stages of staining.
About painting
Dyeing fur with hair dye at home is now very common. The fur of mink, khanorik, kolinsky, marten, muskrat and other animals can be dyed with persistent household cream paints. Currently, there are a large number of different cream paints on the market, prices range from several hundred to tens of rubles.
For painting fur, it is desirable to choose a paint that is not expensive, light-resistant and resistant to the aquatic environment. It is very convenient to dye small skins, pieces and ready-made sewn caps for hats with such paints. One or two packs are required per skin, depending on the size of the fur and on the pubescence. Paint is the contents of two tubes: a tube of paint and a tube of oxidant (peroxide). After mixing the contents of two tubes in a separate bowl, the paint is applied by spreading and rubbed into the fur with a swab.
When dyeing fur with oxidizing or acid dyes, there are many inconveniences. For example, when dyeing with oxidative dyes, it is not advisable to dye one or two skins or a sewn fur cap for a hat, since several components are required: black urzol for fur D, catechol or resorcinol, ammonia 25%, salt and oxidizing agent (perhydrol 30%). Before dyeing, the fur must be etched in chromic acid in an acidic environment. The processes of etching and painting are long, take almost the entire daylight hours, painting is carried out by the dipping method in separate baths at a temperature of 35-38 degrees.
When dyeing fur with acid dyes, the skins need to be tanned with an increased amount of chrome tanning agent so that the skins do not boil. The temperature of the dye solution is 60 - 65 degrees.
It is not advisable to dye fur in small quantities; it is more economical to prepare a batch of skins and spend the whole daylight hours on dyeing.
When painting fur with hair dyes, everything is much simpler, you can dye one or two skins in 1 - 2 hours, using a spread method, rubbing the paint into the fur. In this case, one or two packs of paint are spent. The costs are small.
What hair dyes can be used
From a large number of household cream paints, you need to choose those paints that provide the dyed fur with good resistance to light, water and mechanical stress. When painting mink fur, depending on whether the fur is old or new, the paint consumption is small. If we need to dye skins with long-haired fur (arctic fox, fox, silver fox or sable), the dye consumption increases significantly, especially when dyeing light skins in dark colors and new fur. In this case, the question of price is acute.
For painting mink, muskrat and other fur skins, such stable household hair dye creams have proven themselves well: FARA, IMPRESION +, PRESTIGE. Dyed things retain their color for 2-3 years, are not washed off with water, almost do not differ in color from natural undyed skins.
Paints Fara, Impression, Prestige Selection of shades for different colors of fur
You need to paint the fur in a tone that will be an order of magnitude darker than the existing one. For example, if you need to dye brown mink fur, be sure to take the paint darker. FARA - dark brown No. 502 is suitable for natural brown mink. Mink fur, like any other, is dyed differently. New fur that has not been exposed to the sun (new skins) dyes very poorly, you have to increase the concentration of paint by adding a darker one.
So, for example: in the dark brown paint FARA No. 502, you can add half a tube of black paint No. 501. You can increase the concentration even more by adding half a tube of dark brown #502 to a tube of black #501.
New mink or muskrat fur is poorly dyed, so after drying, it is often necessary to re-dye it in the same way in order to achieve dark shades. Old (worn) fur of mink, muskrat and other animals that has been exposed to the sun dyes much better and the longer the fur was worn, the more intense the color. Within 30 minutes or an hour, the hide is dyed completely with dark brown FARA No. 502 or No. 501.
Shampoo IRIDA Light colors of fur, for example: it is better to tint a gray or blue mink in the same tone with hair dye - IRIDA. For yellow or white mink, it is also better to choose a paint to match. After dyeing, the fur is updated, the color becomes brighter and richer. Light new skins are dyed in dark colors with difficulty, often it is necessary to repaint, increasing the concentration according to the above method. There are no such problems with old light fur, it is well dyed black or brown.
It is better to tint long-haired fur (arctic fox, fox) in a natural color, choosing paint according to color. When painting in dark colors, and even when new skins, the paint goes many times more.
Preparing the item for painting
Worn and moth-eaten places Fur skins, separate pieces or a ready-made sewn fur cap for a hat must be prepared for painting. First, fur skins need to be tested for exposure to water. Fur, before being dyed, must be degreased, cleaned of contaminants by washing. Then it is thoroughly washed in water, dyed, washed and washed again. Skins, due to long-term storage or wear, new skins due to improper dressing, can lose their strength and swell and tear when they get into the water. That is why all skins must be tested for water before dyeing. Separate pieces or thin places of the skin are wetted or thrown into a bowl with warm water and observed for 10-15 minutes, if nothing happens to the skins, they remain strong, such skins can be dyed. It happens the other way around, the skins swell, with a slight stretch they tear, and even worse they become limp, like blotting paper. Such skins must be discarded, otherwise there will be big problems.
Before painting on the skins, defects are eliminated: bald spots, worn and moth-beaten places, bites and tears. These places are cut out in the form of a fish, inserts are sewn in, or simply cut out and sewn together. Weak skins, especially at the seams, are strengthened by gluing strips of non-woven spunbond or interlining with MOMENT 1 glue. MOMENT 1 glue is ideal for skins.
The process of dyeing natural fur with hair dye
Before dyeing, the fur skin or fur cap for the hat, which you cut out and sewn from whole skins or worn fur (an old hat or collar), must be degreased by washing, since greasy and dirty hair is poorly dyed. There are not stained places, spots.
Prepare water at room temperature in a cup, add a small amount of washing powder and wash gently. The skins should already be tested for water, as sometimes the skins swell and tear from the water. So that the skins do not tear, they wash them without sudden movements and try not to twist them when wringing out. After washing, the skin is rinsed in clean warm water, squeezed lightly and prepared for dyeing.
Paint preparation process The paint is prepared according to the instructions enclosed in the box. Hair dye and an oxidizing agent (peroxide) are squeezed out of the tube into a separate bowl, everything is mixed well. The paint is smeared with a sponge on the skin or a sewn fur cap and rubbed into the fur. The skin is rolled up and placed in a bowl. After 10 - 15 minutes they come up, and again the paint is well rubbed into the fur. Constantly watch how the skin is dyed. After half an hour, darkening of the fur appears (in the case of painting the mink brown), the longer the painting, the darker the color. Worn fur is dyed faster.
At the end of dyeing, the skin is rinsed in clean warm water, and then washed with powder in warm water, rinsed several times until clean water. The skin is wrapped in a towel and gently squeezed without twisting, so as not to tear. Then the skin must be dried.
How to dry fur
To dry dyed fur, you need to use a hair dryer, it is best and more efficient to use an old-style vacuum cleaner with a reverse draft. Under the influence of an air jet, the fur dries quickly and fluffs up. If these are new skins and not cut along the tummy, they can be pulled over the rules with the fur outward and dried. The cut ones are stretched with nails on the shield with the fur outward, after drying they are removed and crumpled. Such dyed skins can later be used for sewing new hats or for repairing fur coats. Ready-made sewn and dyed fur caps for hats made by molding are dried with an air jet and pulled on a block in a half-moist form.
When repairing mink coats, sometimes you have to tint brown fur right on the coats. The paint is rubbed with a swab into the burnt place, after staining it is quickly washed off with water and dried with an air stream.
A few secrets...
In the manufacture of fur hats using the molding method, when sewing fur caps, sometimes you have to insert light fur. After dyeing, pulling on a fur cap and drying, it turns out that light fur is different in color. In this case, you can tint the skin right on the deck by pulling out the nails. High concentration paint is reapplied to the unpainted area. After dyeing, the paint is washed off, the fur is quickly dried with an air jet.
As a result of prolonged wear and strong exposure to sunlight, mink fur becomes hard to the touch, such fur must be checked before cutting. A piece of such fur is dyed separately, after drying the fur turns disgusting, the ends of the hair turn gray, the color is very bad. Sometimes in a hurry, such fur appears already on the finished cap, then you need to cut this piece out and replace it with a good one.
Often relying on the quality of the skin, it turns out that after dyeing the skin begins to tear. You can get out of the situation, pull the dried cap onto the finished block and glue the entire cap with pieces of spunbond using glue MOMENT 1. When pulled on the finished block, the skin will no longer tear.
When sewing a fur cap for a hat made by molding, you need to remember that the skins decrease in size after dyeing and drying, so the cap is cut out more in the beom.
Other staining methods
Fur can be dyed in many ways. For these purposes, there are oxidizing, direct, active, acid and a number of other dyes, including natural preparations. When painting, the dipping method is mainly used and less often the smear method. All these methods are time-consuming, require, in addition to the use of basic dyes, a whole range of additional preparations.
When painting fur at home, it takes all daylight hours. The finished fur product (hat, fur coat, vest) cannot be dyed using the dipping method, it is necessary to separate the fur skin from the lining material, and during dyeing, shrinkage of the skins is possible, the skins decrease in size when dried. You can tint some defective places (worn or burnt out), for example, on a fur coat or hat, rubbing the paint into the fur with a brush, and then quickly rinse with water and dry. With this method, household cream hair dyes have proven themselves well. Sometimes such problem areas are tinted with aerosols, by spraying paint.
Spray for dyeing fur
Often, finished fur products (hats, fur coats) look excellent when worn for a long time, but burnt spots appear in some places. In this case, there is no need to paint the whole thing, it is enough to tint problem areas with a spray.
For dyeing fur, you can use paint - an aerosol for suede care. It is a metal can of spray paint.
Aerosol for suede care You need to choose the right shade correctly, otherwise the dyed fur will differ sharply from the main one. The area to be tinted is cleaned of dirt, can be degreased with alcohol, wiping with a swab. It is desirable to cover the fur with any material, except for tinted spots. We spray the paint at a distance of 30-40 cm so that the fur does not stick together and a uniform color is obtained. In this way, you can get an excellent result, the painted places will not differ much from natural fur, the paint will last for several months.
Care for dyed fur
As a result of dyeing fur skins, individual pieces, fur caps for hats with persistent household cream hair dyes, carried out by spreading, by rubbing the dye into the fur, we get a stable color. The paint for a long time when wearing the fur is resistant to light, water and mechanical stress. Such things do not require special care, the same requirements as for any fur product.
For fur dyed by spraying, the requirements are completely different. The color is not particularly resistant, so it is better to protect such a product from the influence of light, water, mechanical stress and elevated temperature. 
In order for the paint to hold better and the fur to shine, it can be treated with a special balm for the care of dyed hair. After such processing, the fur becomes softer and fluffier.
Fur products require daily care, comb more often, require thorough cleaning. Much depends on proper storage. Fur should be covered and stored in a dark place.
In order to refresh the color, a tinting shampoo is suitable. Beforehand, clean the product from dust and dirt with a swab dipped in shampoo. Apply the coloring composition to a small area to evaluate the result. Choose the right color and spray at a distance of more than 70 cm from the product. So that the hairs do not stick together, the can must be constantly moved, and after spraying, immediately comb them with a special brush.
If you want to dye your fox fur in a different color at home, you will need ordinary hair dye. To get the desired result, you must follow the annotation. You can use a hair dryer to dry or let it dry naturally. Radiance and softness will give a hair balm applied to the surface. Be sure to thoroughly wash it off. In order for the entire surface to be perfectly painted over, the product must be perfectly stretched and fixed. Swipe the brush in the direction of the fibers, grabbing the fabric as well.
Keep the staining time indicated in the annotation and wash the fur well. This must be done carefully, without wringing the villi, before that you should wear gloves. After the period indicated on the package has expired, wash in warm water with vinegar.
How to paint faux fur with acrylic
To make it soft and shiny, after drying, you can apply the balm that comes with the paint. Rinse it thoroughly and dry the fur. After such manipulations, the thing will look like new. Often ladies dye their mink with ordinary hair dye. Before applying the composition, mink fur must be prepared in the same way as arctic fox fur.
To facilitate the function, you can use an aerosol or a spray bottle. Spray the product at a distance of approximately 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. We paint faux fur.
Dye faux fur
Products made from it are very popular due to their attractive appearance and applicable price. But over time, faux fur needs painting. If you want to radically change the color of the product, choose the hair dye of the highest degree of durability. But it is worth keeping in mind that the color will last less than 8-9 months, and later it will begin to wash off evenly. To return the original appearance, the thing will have to be painted again. Can mink products be dyed?
Natural fur is always in fashion. But over time, elegant mink items lose their rich color and radiance. How to dye fur at home? There is nothing complicated in this, if you follow the main rules. Spray paint. Owners of things made of fox fur notice from time to time that the tips begin to turn yellow.
To restore the original look, it is not necessary to paint the entire product, it is enough to use paint for suede from an aerosol can. Comb the wet villi with a brush and let the product dry. If you know how to dye real or fake fur, your clothes will always look fresh and careful. This will prevent deformation of the skin. The fur must be attached with pins on a board so that the thing does not lose its shape during the dyeing and drying process. If the mezra is poorly dyed, it will “shine”, creating the effect of the rarest villi. This can be done with hydrogen peroxide.
Only after that you need to apply the coloring composition of the corresponding color scheme. How to apply paint? Owners of elegant things often think about how to dye natural fur at home.
Training. Before proceeding specifically to painting, the fur needs to be prepared. Thoroughly clean it of dust and dirt, so that the paint lays perfectly. You can see how he "behaves" when interacting with chemical substances. Choose a paint one or two shades darker than the natural color - it will make its color more saturated. If the thing turned yellow, it is better not to color it, but to lighten it. It can be tinted from the inside out.
How can I paint the inside of the fur? You can use a special tool or apply hair dye, having previously tested it on an inconspicuous area. We use hair dye. It is often used to color fox. For these purposes, you can use an alkaline solution. For a liter of water, you need to take the following components: approximately 15 grams of salt, two teaspoons of baking soda, 7 ml of detergent, 5 grams of ammonia. Stir all the ingredients so that a homogeneous mass comes out.
Easy to apply with a brush. It is quite dense, therefore it is better to purchase two or three packs so that the color comes out saturated and uniform. Before applying the composition to the entire surface, try it on a small piece. We give the fur product a second life - we learn how to dye fur at home. Happy owners of fur things know that they fade over time. To return the color, it is not necessary to turn to experts for help - this can be done at home. Knowing how to dye fur, you will give the product a second life at the lowest cost.
Rinse off immediately. You can use another composition: combine water, vinegar, alcohol in similar proportions. The wrong side, the core, also needs to be processed. You need to apply glycerin or a greasy cream on it. This must be done with frisky movements, uniform.
How to dye faux fur
Leave the paint for the time indicated on the package. After applying the paint, it must be rubbed over the surface so that there are no bright spots left.
Any fur product on any girl looks very beautiful and expensive, and you can wear it for more than one year. However, such things have a huge drawback - after a long wear, the villi begin to fade, lose their original appearance. From this article, you will learn how to dye fox fur at home so that you continue to be pleased to flaunt in a warm, beautiful little thing.
Preliminary preparation
Before you start painting a fur product, you need to prepare it, namely, get rid of all the dust and dirt on the villi. Otherwise, after the painting procedure, unpleasant stains and stains may form on the product, which will make it lose its former attractiveness even more.
So, for the procedure for cleaning a fur garment, it is necessary to prepare an alkaline solution. For a liter of water, the following proportion must be observed:
- 1 tsp dishwashing detergent or laundry detergent;
- 5 g ammonia;
- 12 g of edible salt;
- 10 g of soda.
Important! If you didn’t have ammonia and soda at home, prepare a solution where other ingredients are needed in equal proportions:
- Alcohol.
- Vinegar.
The cleaning process is as follows:
- Mix all ingredients.
- Apply the resulting liquid mixture to the entire area of the fur product using a brush.
- Rinse the product with clean water.
Important! To avoid drying out, lubricate the inside of the product with some kind of oily hand cream.
Let's move on to painting
Although any fur is a delicate material, you can dye fox fur at home, and even in different ways. Now we will talk about them.
Universal way
Since animal fur is very similar in structure to human hair, it is better to use good hair dyes for dyeing fur at home. This method is suitable for dyeing fox fur, as well as for mink and rabbit.
Important! Do not forget that you need to pay attention to the structure of the villi. For example, mink and fox fur have stiffer hairs, which cannot be said about rabbit or silver fox. For this reason, two packs of dye may be needed.
First of all, you need to make sure that the desired shade is selected. For this reason, before you start painting the entire product, test the effectiveness of the substance on an inconspicuous area of \u200b\u200bthe clothing. Farther:
- Apply paint using a brush.
- Spread the mixture over the surface with your hands.
Important! For this, it is better to use gloves.
- Keep the substance on the product for as long as it is written on the package.
- Rinse thoroughly with clean, warm water.
- Leave it to dry.
Important! During drying, it is better not to use fans or hair dryers - this will only harm the pile.
- After the product has dried, it is necessary to place it in a solution of warm water with vinegar - this will help fix the paint on the pile and extend the wear life.
Important! To give mink, rabbit or fox fur extra shine, you can use a hair balm. To do this, apply a solution of water and balm to the fur, soak for a few minutes and rinse it off.
It is better to dye fur at home with hair dye in natural, basic colors. Otherwise, the fur may not behave as you wish. For example:
- Mink fur from the fact that it was dyed in a light color can turn yellow and lose its expensive look forever.
- And with the fur of a white rabbit - on the contrary, you can experiment by giving it different shades, however, it is strictly forbidden to highlight it.
Important! If you doubt your abilities and are afraid to carry out the dyeing procedure yourself, it is better to take the fur product to a special workshop, where professionals will undertake this procedure.
We paint a mink
A mink fur coat is distinguished by its expensive look and durability to wear. In order to dye mink fur at home, you need to stock up on the listed materials:
- Color matching hair dye.
- Spray.
- Comb with frequent teeth.
- Shampoo and hair balm.
- Oily cream.
To dye a mink coat or hat, you must follow the above algorithm:
- Pre-clean the thing from fat deposits and dust.
- Treat the mezdra with a greasy hand cream.
- Prepare hair dye according to package instructions.
- Slightly moisten the fur surface using the prepared spray bottle.
- Now you can proceed to the main procedure - start painting a mink coat at home. To do this, apply the coloring matter using the same spray gun. The distance should be approximately 55 cm.
- Align the tone by walking over the surface of the comb.
- Wash off the paint with warm water and shampoo, rinse the product with a solution of water and hair balm.
- Again apply cream or glycerin to the mezra.
- Lay the product on a flat surface, wait for it to dry.
- Comb the pile in the direction of its growth.
We paint a fox fur coat
The fox fur coat lends itself most well to artificial coloring. In order to paint it in the desired color, you need to prepare the following materials:
- Hair dye that matches the shade of the fur product.
- Glycerin or fat cream.
- Balm.
- Gloves.
- Paint brush.
- Vinegar.
To carry out artificial coloring of fur at home, you must follow the above algorithm:
- Lubricate the mezdra with a fat cream or glycerin.
- Stretch the material on a flat horizontal surface.
- Put on protective gloves and start applying the coloring composition, simultaneously smoothing the villi with your hand.
- Wait for the time indicated on the paint package.
- Rinse the product in warm water.
- Wash it in vinegar solution.
- Treat a fur coat or hat with a balm diluted in water, rinse off the solution after a couple of minutes.
- Lubricate the mezdra again with a greasy cream, stretch and let it dry on its own.
footage
In this article, you have learned many recommendations on how to dye the fur of a rabbit and other animals. As you have noticed, artificial coloring is not such a complicated procedure as it seems at first. So go ahead, put your things in order, but do it carefully!