Beautiful and practical decoration? Yes, this is a bracelet made of fresh flowers on hand. It complements the outfit, attracts the eye, gives a solemn mood. The bracelet is more often ordered for a bridesmaid for a wedding, for a graduation party and for a wedding ceremony, where you need to hold a wedding candle.
An article about making jewelry on a hand based on a bracelet.
MASTER CLASS:
Materials: gerbera, craspedia, salal leaves, asparagus, bracelet base, tape, wire, oasis glue, palm fibers, decorative wire.
1. Strengthen the gerbera with wire crosswise and tap it, bend the stem carefully to put it on the bracelet base later.
2. Strengthen the leaves with wire and also tape.
3. Fold the greens together, put on the base, press with one clip. Insert a bunch of craspedia between the leaves. Bend the sheet in half, fasten it with a stapler and glue it to the clip, masking it. (Attention: bend carefully, because my hardware broke, the aluminum is brittle!)
4. Add greenery and craspedia on the other side.
5. Add the gerbera, securing it with another clip. Insert a curled decor wire, glue it to greenery and flowers for reliability.
Content
When working on bridesmaids bracelets, you need to consider the style and color scheme of the wedding itself. It is important that the bracelets are in harmony with the outfits of the bridesmaids and bridesmaids. As a basis for bracelets, ready-made metal bracelets, satin ribbons, beautiful elastic bands and much more are often used. You can decorate the base with flowers, beads, beads and other elements.
Lacy
Lace bracelets look very gentle and elegant.
For work you will need:
- Satin ribbon (25mm wide);
- White lace;
- Brooch;
- Elastic band (15 mm wide);
- Half beads on a string;
- Flowers;
- Thermal gun;
- Scissors;
- Needle with thread;
- Pins.
Manufacturing instructions
First we need to cut off the same pieces of lace and satin ribbons approximately 30 cm.
Now we pin one ribbon on the back of the lace (you can baste with a needle and thread). We fold our design in half face inward, we cut off the edges with a pin.
Then the edge is securely stitched on a sewing machine.
Now we take the second piece of white satin ribbon, put it on top of the first one, tacking with pins or threads. We bend the ends of the second ribbon a little inward, fasten it with pins.
We sew two ribbons and lace with machine seams laid on both sides of the ribbon. The ends are left unstitched.
The base is ready, now we start making the decor. We make a bow from a satin ribbon, fasten it with a thread. Sew a brooch in the center of the bow.
We prepare decorative elements for use: half-beads, flowers. We cut off 18 cm of thread with half beads, fold it into a figure eight, fasten it in the center with white threads.
We sew a bow with a beautiful brooch to the front side of the lace base, approximately in the center of the segment. We attach the stitches only to the lace, without piercing the double layer of satin ribbon under the bottom. Glue a figure eight of half beads next to the bow. We attach a large flower on top of the figure eight, glue small flowers side by side, forming a beautiful composition.
In order for the bracelet to sit securely on the wrist, it is necessary to pass an ordinary elastic band between two layers of ribbons. We measure the elastic band with a length equal to the girth of the bridesmaid's wrist. We prick one edge of the elastic band onto a pin, thread the pin into the open joint between the ribbons, draw it around the entire circumference of the bracelet. We securely sew the free edges of the elastic band with white thread.
We distribute the elastic throughout the bracelet, sew up the slot where the elastic was threaded with a hidden seam.
Lace bracelet is ready!
From satin ribbons
Such a bracelet will become a beautiful decoration for the bridesmaids and will remain with them for a long memory of a wonderful event.
For work you will need:
- Satin fabric for flowers (pastel colors);
- Round pattern;
- Paper;
- Simple pencil;
- 50 cm satin ribbon (2-2.5 cm wide);
- Hot glue;
- Lighter;
- Various accessories for decoration (buttons, rhinestones, brooches);
- Scissors;
- Needle with thread.
Manufacturing instructions
We begin work with the manufacture of flowers from satin. To do this, draw a circle with a diameter of 7 cm on a piece of paper. In our case, a babin with adhesive tape served as a template. Cut out the paper template with scissors.
We apply the resulting blank to the satin fabric, circle the circles with a pencil, which we then cut out. If you use circles different diameter, you will get more lush flowers for a peony-type bracelet.
We make cuts on fabric circles with scissors, as shown in the photo.
We singe each circle along the contour with a lighter. This will protect the fabric from fraying, give the petals a rounded shape and uneven edges.
We glue several blanks together one on one, placing the petals in a checkerboard pattern.
Glue the finished flowers to the tape with hot glue. We also singe the ends of the tape over an open fire so that the braid does not unravel. In the center of each flower we attach a decorative button, rhinestones or a brooch.
On this bracelet of satin flowers is ready.
with glamelia
Such a bracelet with a large foamiran glamelia is perfect for a bridesmaid, for a graduate, or to decorate a woman's hand at another festive event.
For work you will need:
- Foamiran of three primary colors (coral, white and burgundy);
- Hemispherical frame made of foam, newspapers, wire or other material;
- Acrylic oil paints;
- Fast fix adhesive;
- Mother-of-pearl beads;
- White teip tape.
Manufacturing instructions
According to the paper template, cut out the petals of white, coral and burgundy. We apply each petal to a heated iron. When the workpiece begins to deform, we shift it onto the mold with a leaf and press it well, stretching the petal to the edges and top. We perform this operation with each workpiece.
Using a sponge and oil paint, we tint the burgundy petals, giving them more deep color. If the material you have is sufficiently saturated color, then this step can be skipped. We leave the tinted blanks to dry for several days.
If there is no foam hemisphere, which is used as the basis for glamelia, then it can be woven from newspaper tubes. To do this, we cross 3 newspaper tubes and braid them with two connecting ones.
We start one tube from above, the other from below. To make the base even and neat, you can braid some round object.
We weave 8 rows and, tucking all the ends of the tubes, we glue them with PVA.
While the base is drying, prepare the center for the flower. We wrap a beaded wire 7 cm long with white type tape. We attach beads to the tape with quick-fix glue. The stamens are ready.
Glue three white petals around the three stamens. We overlap the petals, overlapping the seams.
We attach the flower to a newspaper frame.
The next row is also formed from three petals, placing them in a checkerboard pattern.
After another two white rows, we begin to make coral. We also fasten them in a checkerboard pattern so that the flower turns out to be truly magnificent.
Now we pass two satin ribbons through the newspaper frame on each side to attach the bracelet to the arm.
Last we attach a row of burgundy and a row of coral petals.
On the wrong side we glue small white petals processed on an iron, and a circle of white foamiran with a diameter of 6 cm. So the wrong side will look much prettier and neater.
Post Views: 479
Choosing several bridesmaids for a wedding is a Western tradition, but it has taken root in many countries. Girls who get married want to highlight their girlfriends and show a special attitude towards them. As a rule, for this they sew dresses of the same shade, select the appropriate accessories. But tailoring a festive outfit is a costly business, besides, not all girls want to appear at the holiday in the same attire. Then you can create bracelets for the bridesmaids. These original products will not only highlight the girls among the wedding guests, but also emphasize the style of the newlywed.
How to make bracelets for bridesmaids from satin ribbons
When decorating bracelets for bridesmaids, satin is often used. Ribbons made of such material look gentle, romantic and touching. The future spouse can make beautiful accessories with satin bows, use ribbons to create a fabric flower or as a backdrop for a flower arrangement with live plants. A bracelet with a satin ribbon decorated with shining beads will look stylish on the bridesmaid's wrist. This option is perfect for any style of wedding and requires very little cash investment.
Necessary materials
- glass or pearl beads (the required hole diameter is 2-3 millimeters);
- satin ribbon one and a half centimeters wide, sixty centimeters long;
- lighter;
- scissors.
Stages of creation
DIY fabric flower bracelet
Bridesmaid bracelets must match the style of the holiday. If the newlyweds are organizing a classic event or a romantic wedding, flower accessories will suit the girls. Fresh flowers are expensive, so a future wife who creates jewelry can use tissue plants. It is good if the flower chosen by the bride will be combined with the elements of her bouquet. See below for a tutorial on making a traditional airy rose flower.
Necessary materials
- Cardboard.
- Pencil (or compass).
- Scissors.
- Glue. The master class uses professional gluing equipment, which requires some experience. It can be replaced with ordinary high-quality glue-moment. Perfect Moment Crystal, which does not leave yellow spots on the fabric.
- Threads to match the material.
- Four types of fabric in a shade suitable for the theme of the celebration: chiffon, tulle, silk, cotton fabric (or other dense material).
- Needle.
- Satin ribbon.
Stages of creation
Wedding bracelet ideas for bridesmaids
When deciding how to make bracelets for bridesmaids, the future spouse should take into account the style of the event, the type of her own festive decoration, the flower arrangement in the bouquet, and the tastes of her friends. Each hand-made accessory is not only a decoration that girls will wear during the wedding, but also a memento. If the bridesmaids like the bracelet created by the bride, they will be happy to keep it as a memory of the wedding day, and the bridesmaids will be able to wear modest and simple accessories in everyday life.
From beads and rhinestones
Stylish bracelets with beads are suitable for any type of event, depending on colors chosen by the future wife. Lilac, purple details are suitable for a Provence style wedding, blue beads or pearl elements can be used for a marine celebration, a white and yellow palette will decorate a lemon celebration. With rhinestones, the bride-needlewoman needs to be more careful - the abundance of shining pebbles will ideally emphasize official style wedding, but at an informal event it will look out of place.
From polymer clay
If the future spouse has experience in creating jewelry or a variety of polymer clay figurines, making bracelets for bridesmaids using this material can be a great solution. The newlywed will be able to fully show her imagination by inventing accessories for the chosen theme of the event. The hero of the occasion can mold berries, flowers, delicate butterflies, animals and even non-existent plants with the help of polymer clay for a fabulous wedding style.
From feathers and braid
Feathers are a favorite decoration for girls, because they look airy, stylish and rich. Bridesmaid bracelets with these elements and braid are perfect for a retro wedding, gangster style event. In the upcoming season, boho (bohemian chic) themed holidays will be especially popular, where a variety of feathers of all colors and sizes will be quite appropriate. Feathers on the ornamented lace are able to emphasize the event in the Indian style: bracelets will look interesting and unusual not on the wrists, but, for example, on the forearms of the bridesmaids.
From fresh and artificial flowers
Traditionally, when creating accessories for bridesmaids, real or artificial flowers are used. Certain types of plants can emphasize the image of any girl, and the richness of colors will allow you to find a harmonious combination with the decor of the event.
When making jewelry for friends with fresh flowers, keep in mind that they will require more cash investments than artificial flower bracelets. In addition, their stems will require recharge from a special teip tape. Real or not - the buds will be a wonderful decoration for the bridesmaids.
From decorative twigs and berries
At any time of the year, bracelets for bridesmaids, decorated with decorative or dry twigs with berries, will look great. These decor elements are suitable for an autumn, winter wedding, when prices for fresh flowers rise noticeably. They will decorate the event in rustic style. Berries and small branches look cozy, cute, romantic, create a special mood.
Video - a lesson on creating colored bracelets
Almost every needlewoman engaged in sewing could have shreds of light thin fabrics lying around at home. These materials will come in handy if you want to make stylish, original wedding bracelets for your girlfriends. To create a beautiful accessory, you need to cut out the petals, glue them to the base (lace or satin ribbon), and then decorate with an elegant brooch, beaded beads or other decorative elements to your taste. Detailed master class in the video below will help you make stylish bracelets that will be a wonderful decoration for bridesmaids.
Each girl prepares in advance for any celebration and pays special attention to her image, choosing accessories for the dress. But ordinary jewelry no longer surprises anyone ... And so you want to be bright at the holiday and wear the most original and unique things.
Spring holiday is always an abundance of fresh flowers. You can create flower arrangements not only for the room, but also make original decorations out of them. The most unusual material for a bracelet for a spring celebration will be a bouquet of fresh flowers. You can make it yourself.
To create such an unusual bracelet, you need to prepare:
- flower buds (their number will depend on the desired composition);
- leaves and other greens;
- thin flower wire;
- green teip tape (sticky paper used for decoration);
- satin ribbon (narrow and wide of the same color);
- the basis for the bracelet (can be purchased at any florist shop);
- glue gun.
.jpg)
When choosing flowers for a bracelet, pay attention to the desired color and flatter buds. They will look neat on the hand (gerberas, chrysanthemums). Roses are the most classic option for a holiday, but they will look voluminous on the hand and may interfere with you. Ideal flowers for decorations are orchids. They have small flowers and can do without water. long time.
.jpg)
For additions, use small leaves, small flowers, and even feathers. But do not decorate the bracelet with a lot of greenery, otherwise you will cover the main flowers.
.jpg)
For orchids, cut off the stem, leaving about one centimeter from the flower head. Pierce at the base of the stem with a 4 cm flower wire.
.jpg)
Bend the wire on both sides. This is necessary to strengthen the bud in the composition, no matter what it breaks at the most inopportune moment.
.jpg)
Then we wrap the stem and wire with teip tape.
.jpg)
As you twist the ribbon, add other flowers. Form a composition of two buds. In this case, it is no longer necessary to reinforce the second stem with wire. Once will be enough.
.jpg)
Now connect all the parts together using the same adhesive tape.
Try to set the flowers at different levels (ladder) to get a flatter composition that will fit on the hand.
.jpg)
Attach greens and small flowers to the back of the bud. Fasten everything together well with teip tape.
.jpg)
The flower arrangement is ready. Now you need to make the basis for it. Wrap the wire with green tape along the entire length. Wrap it in the form of two rings at the top and loose ends at the bottom.
.jpg)
Pass a wide satin ribbon through both rings so that the ribbon can move freely.
.jpg)
Attach a narrow ribbon to the bouquet on the front. Glue the middle of the tape with a glue gun. Try not to get glue on the petals, otherwise the flowers may deteriorate.
.jpg)
We connect the bouquet with wire loops. To do this, we thread a narrow ribbon into rings and tie a double knot on the back of the bouquet. We trim the edges and burn them - so they will not unravel along the strings. The wide ribbon remains unattached for now.
.jpg)
And now the most important point. It is necessary to fix the bouquet to the bracelet base. A ready-made base with soft edges and a special mount for a bouquet is best suited. Carefully place the bouquet on the workpiece and thread the fasteners through the loops. Bend their edges around the bouquet so that the flowers hold firmly on the bracelet.
.jpg)
To complete the creation of decorations from fresh flowers, you need to tie a wide ribbon into a bow in front of the bouquet. Make the knot strong, otherwise the bouquet may fall out of the base.
Cut the edges of the tape with a corner and be sure to burn it. That's all - an unusual bracelet made of fresh flowers is ready. You can wear it in any direction: with a ribbon on the wrist or to the elbow - this is how you like it.
.jpg)
The finished composition must be stored in the refrigerator until you wear it for the holiday. But it is best to make a bracelet on the same day when the event is planned. So the flowers will look the freshest.
With such an original and unique bracelet you will be the most irresistible at the spring festival!
Don't know what to give your beloved grandmother for her birthday? Well, for starters, you can give a bouquet of flowers. Flower delivery Dolgoprudny always works for you. You can choose and pay, and our courier will deliver them in the shortest time.